MTL Recent Publications

Journal Publications

  • A. Kucuk, C. Dambra, R. S. Lima and C. C. Berndt,"Thermally Sprayed Si3N4-Soda Lime Silica Composite Coatings", Coat. Surf. Technol. Submitted, 2000.

  • C. E. Mancini, A. Kucuk and C. C. Berndt,"Porosity Determination of Thermally Sprayed Hydroxyapatite Coatings", Mater. Sci. Letter. Submitted, 2000.

  • A. Kucuk, R. S. Lima and C. C. Berndt,"Influence of Plasma Spray Parameters on Spray Efficiency of Yttria Partially Stabilized Zirconia Coatings II: Physical Characteristics", J. Am. Ceram. Soc. Submitted, 2000.

  • A. Kucuk, R. S. Lima and C. C. Berndt,"Influence of Plasma Spray Parameters on Deposition Efficiency of Yttria Partially Stabilized Zirconia Coatings I: In Flight Diagnostics", J. Am. Ceram. Soc. Submitted, 2000.

  • R. S. Lima, A. Kucuk and C. C. Berndt,"Thermally Sprayed Nano-structured Zirconia Coatings", Coat. Surf. Technol. Submitted, 2000.

  • A. Kucuk, C. C. Berndt, U. Senturk, and R. S. Lima,"Influence of Plasma Spray Parameters on the Mechanical Properties of Yttria Stabilized Zirconia Coatings II: Acoustic Emission Response", Mater. Sci. Eng. A Accepted, 2000.

  • A. Kucuk, C. C. Berndt, U. Senturk, R. S. Lima and C. R. C. Lima,"Influence of Plasma Spray Parameters on the Mechanical Properties of Yttria Stabilized Zirconia Coatings I: Four Bend Point Test", Mater. Sci. Eng. A. Accepted, 2000.

  • U. Senturk, R. S. Lima, C. R. C. Lima, C. C. Berndt, "Deformation of Plasma Sprayed Thermal Barrier Coatings". Paper accepted for publication: J. Engineering for Gas Turbines and Power. Accepted, 1999.

  • T. Nakamura, G. Qian and C.C. Berndt, "Effects of Pores on Mechanical Properties of Plasma Sprayed Ceramic Coatings", J. Am. Ceram. Soc., 83[3] 578-84 (2000).

  • S.H. Lee and C. C. Berndt,"Quantitative Evaluation of Void Distribution within a Plasma-Sprayed Ceramic", J. Am. Ceram. Soc., 82[11] 17-21 (1999).

  • G. Qian, T. Nakamura and C.C. Berndt, "Effects of Thermal Gradient and Residual Stresses on Thermal Barrier Coating Fracture", Mechanics of Materials, 27[2] 91-110 (1998).

  • C.K. Lin, C.C. Berndt, "Acoustic Emission Studies on Thermal Spray Materials", Surface and Coatings Technology 102[1-2] 1-7 (1998).

  • A. Ibrahim and C. C. Berndt,"The Effect of High-velocity Oxygen Fuel, Thermally Sprayed WC-Co Coatings on the High-cycle Fatique of Aluminum Alloy and Steel", J. Mater. Sci. 33 3095-3100 (1998).

  • J. Ilavsky, C.C. Berndt, "Thermal Expansion Properties of Metallic and Cermet Coatings", Surface & Coatings Technology 102[1-2] 19-24 (1998).

  • C.C. Berndt and E.J. Lavernia, " Thermal Spray Processing of Nanoscale Materials--A Conference Report with Extended Abstracts", Journal of Thermal Spray Technology, Vol. 7 (3), September 1998, 411-441.

  • C.K. Lin, S.H. Leigh and C.C. Berndt, "Acoustic Emission Responses of Plasma-Sprayed Alumina-3% Titania Deposits", Thin Solid Films, v310 108-114 (1997).

    Conference Publications

  • L. Sun, C. C. Berndt, A. Kucuk, R. S. Lima and K. A. Khor,"Effect of Spraying Parameters on Phase Formation and Distribution in Plasma Sprayed Hydroxyapatite Coatings", International Thermal Spray Conference 2000 Proceeding. Edited by C.C. Berndt, ASM Inter., Materials Park, OH (2000). Accepted.

  • R, S. Lima, A. Kucuk and C. C. Berndt,"Correlation Between Deposition Efficiency, Hardness and Elastic Modulus for Thermally Sprayed Zirconia", International Thermal Spray Conference 2000 Proceeding. Edited by C.C. Berndt, ASM Inter., Materials Park, OH (2000). Accepted.

  • C. R. C. Lima, U. Senturk, R. S. Lima, and C. C. Berndt, "Thermal Conductivity Behavior of Sol-Gel Post Treated Thermal Barrier Coatings". Proceeding of International Thermal Spray Conference 2000, Montreal, Canada, 8-11 May, 2000. Edited by C. C. Berndt, ASM International, Materials Park, OH (Accepted).

  • A. Kucuk, C. C. Berndt, U. Senturk and R. S. Lima,"Characterization of the Mechanical Properties of TBCs via a Taguchi Experimental Design", International Thermal Spray Conference 2000 Proceeding. Edited by C.C. Berndt, ASM Inter., Materials Park, OH (2000). Accepted.

  • A. Kucuk, C. C. Berndt, U. Senturk, R. S. Lima and C. R. C. Lima,"Deformation Characteristics of Plasma Sprayed Thermal Barrier Coatings", 24th Annual Cocoa Beach Meeting Proceeding, Am. Ceram Soc., Westerville, OH (2000). Accepted.

  • J. Karthikeyan, C. M. Kay, J. Lindeman, R. S. Lima, C. C. Berndt, Cold Spray Processing of Titanium Powder. Proceeding of International Thermal Spray Conference 2000, Montreal, Canada, 8-11 May, 2000. Edited by C. C. Berndt, ASM International, Materials Park, OH (Accepted).

  • L. Sun, C. C. Berndt, A. Kucuk, R. S. Lima and K. A. Khor,"Surface Characterization of Plasma Sprayed Hydroxyapatite Coatings", ", 24th Annual Cocoa Beach Meeting Proceeding, Am. Ceram Soc., Westerville, OH (2000). Accepted.

  • U. Senturk, R. S. Lima, C. C. Berndt, C. K. Lin, C. R. C. Lima, "Processing and Mechanical Properties of Plasma Sprayed Thermal Barrier Coatings". Conference Proceedings of the United Thermal Spray Conference, Ed. E. Lugscheider and P. A. Kammer, Verlag fur Schweissen und verwantle Verfahren DVS-Verlag GmbH, Dusseldorf, Germany, 1999, p. 815-819.

  • C. K. Lin, U. Senturk, R. S. Lima, C. C. Berndt, J. C. Shieh, P. Y. Lee, "Investigations of Thermal Barrier Coatings with Loading and Unloading to Various Stress Levels". Conference Proceedings of the United Thermal Spray Conference, Ed. E. Lugscheider and P. A. Kammer, Verlag fur Schweissen und verwantle Verfahren DVS-Verlag GmbH, Dusseldorf, Germany, 1999, p. 809-814.

  • R. S. Lima, U. Senturk, C. C. Berndt, C. R. C. Lima, Spraying Characteristics of Nanostructured Zirconia Particles. Conference Proceedings of the United Thermal Spray Conference, Ed. E. Lugscheider and P. A. Kammer, Verlag fur Schweissen und verwantle Verfahren DVS-Verlag GmbH, Dusseldorf, Germany, 1999, p. 190-196.

  • A. Ibrahim, U. Senturk, C. C. Berndt, "Cyclic Deformation and Fatique Damage of Aluminum Alloy and Steel HVOF Sprayed with WC-Co Coatongs". Conference Proceedings of the United Thermal Spray Conference, Ed. E. Lugscheider and P. A. Kammer, Verlag fur Schweissen und verwantle Verfahren DVS-Verlag GmbH, Dusseldorf, Germany, 1999, p. 479-82.

  • H. Boukari, A.J. Allen, G. G. Long, J. Ilavsky, J. Wallace, C. C. Berndt, and H. Herman, "The Role of Feedstock Particles Size on the Microstructural Behavior of Plasma-Sprayed YSZ Deposits During Annealing", Proceedings of UTSC '99, Dusseldorf, Germany.

  • A.J. Allen, G. G. Long, J. Ilavsky, J. Wallace, C. C. Berndt, and H. Herman, "Microstructural Changes in YSZ Deposits During Annealing", Proceedings of UTSC '99, Dusseldorf, Germany.

  • J.A. Brogan, C.C. Berndt, A. Claudon and C. Coddet, "Mechanical Properties of Spray-Formed Composite Structures", Thermal Spray: Meeting the Challenges of the 21st Century: Proceedings of the 15th International Thermal Spray Conference, Vol. 2, Edited by: Christian Coddet, Nice, France, May, 1998, 1173-1178.

  • M.L. Allan, C.C. Berndt, J.A. Brogan and D. Otterson, "Thermal Sprayed Polymer Coatings for Corrosion Protection in a Biochemical Treatment Process", Thermal Spray: Meeting the Challenges of the 21st Century: Proceedings of the 15th International Thermal Spray Conference, Vol. 1, Edited by: Christian Coddet, Nice, France, May, 1998, 13-18.

  • S.H. Leigh, C.C. Berndt, M.K. Ferber, L. Riester, "Nanoindentation Study of Thermal Spray Deposits", Proceedings of the United Thermal Spray Conference entitled: Thermal Spray: A United Forum for Scientific and Technological Advances, Published by ASM International, Materials Park, Ohio, Edited by C.C. Berndt, September, 1997, 723-729.