15. MRSEC PUBLICATIONS 2000-PRESENT
 
PROCESS SCIENCE AND MODELING

JOURNALS

1.  H. B. Xiong, L. L. Zheng, S. Sampath, R. L. Williamson and J. R. 
Fincke, "Three-Dimensional Simulation of Plasma Spray: Effects of Carrier Gas 
Flow and Particle Injection on Plasma Jet and Entrained Particle Behavior", 
International Journal of Heat and Mass Transfer, 47 (2004), pp. 5189-5200.

2.  Y. P. Wan, S. Sampath, V. Prasad, R. Williamson and J. R. Fincke, "An 
advanced model for plasma spraying of functionally graded materials", Journal 
of Materials Processing Technology, 137 (2003), pp. 110-116.

3.  H. B. Xiong and L. L. Zheng, "Melting, oxidation, evaporation of 
particle in-flight in plasma spray processes", Journal of Materials Science and 
Technology, 19 (2003), pp. 49-52.

4.  Y. P. Wan, J. R. Fincke, S. Sampath, V. Prasad and H. Herman, "Modeling 
and experimental observation of evaporation from oxidizing molybdenum particles 
entrained in a thermal plasma jet", International Journal of Heat and Mass 
Transfer, 45 (2002), pp. 1007-1015.

5.  X. Jiang, Y. Wan, H. Herman and S. Sampath, Role of condensates and 
adsorbates on substrate surface on fragmentation of impinging molten droplets 
during thermal spray", Thin Solid Films, 385 (2001), pp. 132-141.

6.  A. Kucuk, R. S. Lima and C. C. Berndt, "Influence of plasma spray 
parameters on in-flight characteristics of ZrO2-8 wt% Y2O3 ceramic particles", 
Journal of the American Ceramic Society, 84 (2001), pp. 685-692.

7.  A. Kucuk, R. S. Lima and C. C. Berndt, "Influence of plasma spray 
parameters on formation and morphology of ZrO2-8 wt% Y2O3 deposits", Journal of 
the American Ceramic Society, 84 (2001), pp. 693-700.

8.  Y. P. Wan, J. R. Fincke, X. Y. Jiang, S. Sampath, V. Prasad and H. 
Herman, "Modeling of oxidation of molybdenum particles during plasma spray 
deposition", Metallurgical and Materials Transactions B, 32 (2001), pp. 475-481.

9.  Y. P. Wan, V. Gupta, Q. Deng, S. Sampath, V. Prasad, R. Williamson and 
J. R. Fincke, "Modeling and visualization of plasma spraying of functionally 
graded materials and its application to the optimization of spray conditions", 
Journal of Thermal Spray Technology, 10 (2001), pp. 382-389.

10.  L. L. Zheng and H. Zhang, "A 3D adaptive level set scheme for moving 
boundary problems: Application to droplet spread and solidification", Numerical 
Heat Transfer Part B-Fundamentals, 37 (2000), pp. 437-454.

CONFERENCE PROCEEDINGS

11.  A. Vaidya, T. Streibl, S. Sampath and H. Zhang, "A Comparative 
Diagnostic Analysis of Morphologically Different YSZ Powders", Thermal Spray 
Solutions: Advances in Technology and application (ITSC 2004), Osaka, Japan, 
2004, Proceedings of ASM Electronic Proc.

12.  G. Wei, H. B. Xiong, L. L. Zheng and H. Zhang, "An Advanced Ceramic 
Coating Buildup Model for Thermal Spray Processes", Thermal Spray Solutions: 
Advances in Technology and application (ITSC 2004), Osaka, Japan, 2004, 
Electronic Proceedings.

13.  H. B. Xiong, L. L. Zheng, J. Margolies and S. Sampath, "Numerical 
Simulation of Radio Frequency Induction Plasma Spray Processing", International 
Mechanical Engineering Congress and Exposition, IMECE2004-59895, Anaheim, CA, 
2004, Electronic Proceedings

14.  H. B. Xiong, L. L. Zheng, S. Sampath, J. R. Fincke and R. L. 
Williamson, "Three-Dimensional Simulations of Plasma Spray Jet", ASME: Summer 
Heat Transfer Conference, HT2003-47153, Las Vegas, Nevada, 2003, Electronic 
Proceedings

15.  H. Zhang, H. B. Xiong, L. L. Zheng, A. Vaidya and L. Li, "Partially 
Melted Particle and Its Splat Morphology", in C. Moreau and B. R. Marple, eds., 
Thermal Spray: Advancing the Science and Applying the Technology (ITSC 2003), 
ASM International, Materials Park, OH, USA, Orlando, Florida, USA, 2003, p905-
911

16.  H. B. Xiong, L. L. Zheng, S. Sampath and J. R. Fincke, 
"Melting/Oxidation Behavior of In-flight Particles in Plasma Spray Processes", 
International Mechanical Engineering Congress and Exposition, New Orleans, 
Louisiana, 2002, Electronic Proc..

17.  H. Zhang, H. B. Xiong, L. L. Zheng, A. Vaidya, L. Li and S. Sampath, 
"Melting Behavior of In-flight Particles and Its Effects on Splat Morphology in 
Plasma Spraying", International Mechanical Engineering Congress and Exposition 
2002-21364, ASME International, New Orleans, Louisiana, USA, 2002, p1-8.

18.  Q. Deng, H. Zhang, V. Prasad, L. Prchlik, and A. Dent, "Modeling of 
Particle Movement and Thermal Behavior in a High-Velocity Oxy-Fuel (HVOF) 
Spraying Process", Proc. National Heat Transfer Conference, NHTC01-11824, 2001, 
p.1-8.

19.  Vaidya, G. Bancke, S. Sampath and H. Herman, "Influence of Process 
Variables on the Plasma Sprayed Coatings: An Integrated Study", in Berndt. C. 
C. and Khor. K. A., eds., International Thermal Spray Conference (ITSC 2001), 
ASM International, Materials Park, OH, Singapore, 2001, , p.1345-1349.

20.  H. Zhang, and L. L. Zheng, "Modeling of In-flight Particle and 
Deposition During Plasma and HVOF Spraying", Proc. Int. Conf. on Energy 
Conversion and Application (ICECA 2001), Wuhan, China, 2001, p.147-153

21.  Y. P. Wan, V. Prasad, S. Sampath and J. R. Fincke, "Evaporation of 
Plasma Sprayed Powder Particles", 4th ISHMT/ASME Heat Transfer Conference, 
Pune, India, 2000

IMPACT AND RAPID SOLIDIFICATION

JOURNALS

22.  L. Li, G. Wei, A. Vaidya, H. Zhang and S. Sampath, "Substrate Melting 
during Thermal Spray Splat Quenching", Thin Solid Films, 468 (2004), pp. 113-
119. 

23.  H. Zhang, X. Y. Wang, L. L. Zheng and S. Sampath, "Numerical simulation 
of nucleation, solidification, and microstructure formation in thermal 
spraying", International Journal of Heat and Mass Transfer, 47 (2004), pp. 2191-
2203.

24.  G. X. Wang, R. Goswami, S. Sampath and V. Prasad, "Understanding the 
heat transfer and solidification of plasma-sprayed yttria-partially stabilized 
zirconia coatings", Materials and Manufacturing Processes, 19 (2004), pp. 259-
272. 

25.  H. Zhang, G. Wei, L. Zheng, L. Li, X. Y. Wang and A. Vaidya, "Numerical 
and experimental studies of substrate melting and resolidification during 
thermal spraying", Journal of Materials Science & Technology, 19 (2003), pp. 
137-140. 

26.  X. Y. Wang, H. Zhang, L. L. Zheng and S. Sampath, "An integrated model 
for interaction between melt flow and non-equilibrium solidification in thermal 
spraying", International Journal of Heat and Mass Transfer, 45 (2002), pp. 2289-
2301.

27.  G. X. Wang, V. Prasad and S. Sampath, "Rapid solidification in thermal 
spray deposition: Microstructure and modeling", Sadhana-Academy Proceedings in 
Engineering Sciences, 26 (2001), pp. 35-57. 

28.  S. Sampath and X. Jiang, "Splat formation and microstructure 
development during plasma spraying: deposition temperature effects", Materials 
Science and Engineering A, 304-306 (2001), pp. 144-150.

29.  H. Zhang, X. Y. Wang, L. L. Zheng and X. Y. Jiang, "Studies of splat 
morphology and rapid solidification during thermal spraying", International 
Journal of Heat and Mass Transfer, 44 (2001), pp. 4579-4592

30.  Y. P. Wan, H. Zhang, X. Y. Jiang, S. Sampath and V. Prasad, "Role of 
solidification, substrate temperature and Reynolds number on droplet spreading 
in thermal spray deposition: Measurements and modeling", Journal of Heat 
Transfer-Transactions of the Asme, 123 (2001), pp. 382-389

31.  G. X. Wang and V. Prasad, "Microscale heat and mass transfer and non-
equilibrium phase change in rapid solidification", Materials Science and 
Engineering A, 292 (2000), pp. 142-148.

32.  G. X. Wang, V. Prasad and S. Sampath, "An integrated model for 
dendritic and planar interface growth and morphological transition in rapid 
solidification", Metallurgical and Materials Transactions A, 31 (2000), pp. 735-
746.

PROCEEDINGS

33.  L. Li, X. Y. Wang, A. Vaidya, G. Wei, H. Zhang and S. Sampath, 
"Substrate Melting During Thermal Spray Splat Quenching: Case Study for 
Molybdenum Droplets on Various Substrates", in C. Moreau and B. R. Marple, 
eds., Thermal Spray 2003 : Advancing the Science and Applying the Technology, 
ASM Int., Orlando, Fl, USA, 2003, p1041-1046

34.  G. Wei, H. Zhang, L. Li and X. Y. Wang, "Numerical and Experimental 
Studies of Substrate Melting during Thermal Spraying", HT2003: ASME Summer Heat 
Transfer Conference, HT2003-47154, Las Vegas, Nevada, 2003, Electronic 
Proceedings

35.  H. Zhang, X. Y. Wang and S. Sampath, "Analysis of Undercooling 
Nucleation, Rapid Solidification, and Microstructure Formation in Thermal 
Spraying", International Mechanical Engineering Congress and Exposition 2002-
32907, ASME International, New Orleans, Louisiana, 2002, p1-13

36.  X. Y. Wang, H. Zhang, L. L. Zheng, and S. Sampath, "A Micro/Macro 
Integrated Model for Melt Flow and Non-Equilibrium Solidification for Thermal 
Spraying", International Mechanical Engineering Congress and Exposition 2001-
24367, ASME International, New York, New York, 2001, p1.

37.  Y. P. Wan, H. Zhang, X. Y. Jiang, S. Sampath and V. Prasad, "Role of 
Solidification, Substrate Temperature and Reynolds Number on Droplet Spreading 
in Thermal Spray Deposition", 33rd National Heat Transfer Conference, Journal 
of Heat Transfer-Transactions of the ASME, Albuquerque, NHTC99-121, NM, 2000, 
Electronic Proc.

38.  G. X. Wang, V. Prasad, and S. Sampath, "Rapid Solidification in Thermal 
Spray Deposition: Microstructure and Modeling", Intl. Workshop on 
Solidification Processing, India, 2000.

39.  G.-X. Wang, R. Goswami, S. Sampath and V. Prasad, "Heat Transfer and 
Solidification Analysis of Splat Formation in Plasma-Sprayed Zirconia-Yttria 
Thermal Barrier Coatings", 4th ISHMT/ASME Heat Transfer Conference, Pune, 
India, 2000, p.1135.

40.  G.-X. Wang, V. Prasad and S. Sampath, "Rapid Solidification in Thermal 
Spray Deposition: Microstructure and Modeling", International Workshop on 
Solidification Processing, India, 2000, Vol. 26(1-2), p.35.

41.  X. Y. Jiang, Y. Wan, X. Y. Wang, H. Zhang, R. Goswami, H. Herman and S. 
Sampath, "Investigation of Splat/Substrate Contact during Molybdenum Thermal 
Spraying", in C. C. Berndt, ed., Thermal Spray: Surface Engineering via Applied 
Research (ITSC 2000), ASM International, Materials Park, OH, USA, Montreal, 
Quebec, Canada, 2000, p729

42.  H. Zhang, "Mechanism and Modeling of Micro-droplet Impact, 
Fragmentation and Solidification", IMECE'2000, Orlando, Fl, USA, 2000, HTD-Vol. 
366-3, p.367-379.

43.  H. Zhang, G.-X. Wang, L. L. Zheng, Y. P. Wan and X. Y. Jiang, 
"Experimental/Numerical Studies of Substrate Melting and Splat Morphology 
During Spraying", National Heat Transfer Conference 2000-12184, 2000, p.1-13.

MICROSTRUCTURE CHARACTERIZATION

JOURNALS

44.  A. Kulkarni, J. Gutleber, S. Sampath, A. Goland, W. B. Lindquist, H. 
Herman, A. J. Allen and B. Dowd, "Studies of the microstructure and properties 
of dense ceramic coatings produced by high-velocity oxygen-fuel combustion 
spraying", Materials Science and Engineering A, 369 (2004), pp. 124-137

45.  M. L. Lau, J. He, R. Schweinfest, M. Ruhle, C. G. Levi and E. J. 
Lavernia, "Synthesis and characterization of nanocrystalline Cu-Al coatings", 
Materials Science and Engineering A, 347 (2003), pp. 231-242.

46.  T. Chraska and A. H. King, "Effect of Different Substrate Conditions 
upon Interface with Sprayed Zirconia- a TEM Study", Surface & Coatings 
Technology, 157 (2002), pp. 238-246.

47.  T. Chraska and A. H. King, "Transmission electron microscopy study of 
rapid solidification of plasma sprayed zirconia - part I. First splat 
solidification", Thin Solid Films, 397 (2001), pp. 30-39.

48.  T. Chraska and A. H. King, "Transmission electron microscopy study of 
rapid solidification of plasma sprayed zirconia - part II. Interfaces and 
subsequent splat solidification", Thin Solid Films, 397 (2001), pp. 40-48.

49.  R. Goswami, H. Herman, S. Sampath, X. Jiang, Y. Tian and G. Halada, 
"Plasma sprayed Mo-Mo oxide nanocomposites: synthesis and characterization", 
Surface & Coatings Technology, 141 (2001), pp. 220-226.

50.  X. Y. Jiang, S. Sampath and H. Herman, "Grain morphology of molybdenum 
splats plasma-sprayed on glass substrates", Materials Science and Engineering 
A, 299 (2001), pp. 235-240.

51.  S. Rangarajan and A. H. King, "Non-destructive evaluation of 
delamination in ceramic thin films on metal substrates by scanning electron 
microscopy", Thin Solid Films, 385 (2001), pp. 22-28.

52.  T. Chraska, A. H. King and C. C. Berndt, "On the size-dependent phase 
transformation in nanoparticulate zirconia", Materials Science and Engineering 
a-Structural Materials Properties Microstructure and Processing, 286 (2000), 
pp. 169-178.

53.  A. Kulkarni, S. Sampath, A. Goland, H. Herman and B. Dowd, "Computed 
microtomography studies to characterize microstructure-property correlations in 
thermal sprayed alumina deposits", Scripta Materialia, 43 (2000), pp. 471-476.

PROCEEDINGS

54.  B. Saruhan, A. Flores Renteria, A. Kulkarni, F. DeCarlo and J. Ilavsky, 
"Characterization of Y2O3-doped La2Zr207 based EB-PVD thermal barrier coatings 
using X-ray microtomography (CMT) and small-angle neutron diffraction (SAND)", 
Ceramics Science and Engineering, Cocoa Beach Florida, 2004, Electronic 
Proceedings

55.  S. Deshpande, S. Sampath, P. I. Gouma and H. Herman, "Microstructural 
Characterization across Length Scales of Thermal Sprayed Ni-5wt. %Al Coatings", 
in B. R. Marple, ed., Thermal Spray: Advancing the Science and Applying the 
Technology (ITSC 2003), ASM International, Material Park, OH, USA, Orlando, 
Florida, USA, 2003, p1419.

56.  T. A. Dobbins, A. J. Allen, J. Ilavsky, G. G. Long, P. R. Jemian, A. 
Kulkarni and H. Herman, "Recent Development in Characterization of Anisotropic 
Void Populations in Industrial Thermal Barrier coatings Using Ultra-small-angle 
X-ray Scattering", in M. Waltraud, K. and L. Hau Tay, eds., 27th International 
Cocoa Beach Conference on Advanced Ceramics and Composites, Ceramic Science and 
Engineering Proceedings, Cocoa Beach, Florida, USA, 2003, p.517-524.

57.  A. J. Allen, G. G. Long, J. Ilavsky, A. Kulkarni, S. Sampath, H. Herman 
and A. N. Goland, "Small-Angle Scattering Analysis of Porosity in Thermal Spray 
and EB-PVD Thermal Barrier Coatings", International Ceramic Congress, Florence, 
Italy, 2002, Electronic proceedings

ADVANCED X-RAY AND NEUTRON SCATTERING CHARACTERIZATION

JOURNALS

58.  A. Kulkarni, H. Herman, A. Goland, A. Allen, J. Ilavsky, G. Long, F. 
DeCarlo, "Advanced microstructural characterization of plasma-sprayed zirconia 
coatings over extended length scales", In press J. Therm. Spray. Technol., 
(Jan. 2005).

59.  Q.Y. Yan (Alex), R. J. Gambino, S. Sampath, "Neutron diffraction and 
Ferromagnetic resonance study on Plasma-sprayed MnZn ferrite films", J. Applied 
Physics, 97 (2005).

60.  S. Deshpande, A. Kulkarni, S. Sampath and H. Herman, "Application of 
image analysis for characterization of porosity in thermal spray coatings and 
correlation with small-angle neutron scattering", Surface & Coatings Technology 
187 (2004), pp. 6-16.

61.  A. Kulkarni, A. Goland, H. Herman, A. J. Allen, J. Ilavsky, G. Long, C. 
A. Johnson and J. A. Ruud, "Microstructure-property Correlations in Industrial 
Barrier Coatings", Journal of American Ceramic Society, 87 (2004), pp. 1294-
1300.

62.  A. Kulkarni, H. Herman, J. Almer, U. Lienert, D. Haeffner, J. Ilavsky, 
S. Fang and P. Lawton, "Depth-resolved Porosity Investigation of EB-PVD Thermal 
Barrier Coatings Using High-energy X-rays", Journal of the American Ceramic 
Society, 87 (2004), pp. 268.

63.  A. Kulkarni, H. Herman, F. DeCarlo and R. Subramanian, "Microstructural 
Characterization of Electron Beam-Physical Vapor Deposition Thermal Barrier 
Coatings through High-Resolution Computed Microtomography", Metallurgical and 
Materials Trans, 35A (2004), pp. 1945-1951.

64.  N. Margadant, J. Neuenschwander, S. Stauss, H. Kaps, J. Matejicek , G. 
Rössler and A. Kulkarni, "Impact of Probing Volume from Mesoscopic-to 
Macroscopic-Scale on Elastic Modulus Values of Thermally Sprayed Metallic 
Coatings Determined Different Mechanical Methods", Surface & Coatings 
Technology (2004).

65.  A. Kulkarni, Z. Wang, T. Nakamura, S. Sampath, A. Goland, H. Herman, J. 
Allen, J. Ilavsky, G. Long, J. Frahm and R. W. Steinbrech, "Comprehensive 
microstructural characterization and predictive property modeling of plasma-
sprayed zirconia coatings", Acta Materialia, 51 (2003), pp. 2457-2475.

66.  H. Boukari, A. J. Allen, G. G. Long, J. Ilavsky, J. S. Wallace, C. C. 
Berndt and H. Herman, "Small-angle neutron scattering study of the role of 
feedstock particle size on the microstructural behavior of plasma-sprayed 
yttria-stabilized zirconia deposits", Journal of Materials Research, 18 (2003), 
pp. 624-634.

67.  H. Sitepu, S. J. K., H. J. Prask, M. D. Vaudin and S. Sampath, 
"Crystallographic Preferred Orientation Phase Fraction of Plasma Spray Coatings 
by means of Neutron X-ray Diffractions (reprinted)", Journal of Indonesian 
Physical Society, A5 (2002), pp. 0212.

68.  A. J. Allen, G. G. Long, H. Boukari, J. Ilavsky, A. Kulkarni, S. 
Sampath, H. Herman and A. N. Goland, "Microstructural characterization studies 
to relate the properties of thermal-spray coatings to feedstock and spray 
conditions", Surface and Coatings Technology, 146-147 (2001), pp. 544-552.

69.  A. J. Allen, J. Ilavsky, G. G. Long, J. S. Wallace, C. C. Berndt and H. 
Herman, "Microstructural characterization of yttria-stabilized zirconia plasma-
sprayed deposits using multiple small-angle neutron scattering", Acta 
Materialia, 49 (2001), pp. 1661-1675.

PROCEEDINGS

70.  A. Kulkarni and H. Herman, "Microstructure-property Correlations in 
Industrial Thermal Barrier Coatings", in M. Waltraud, K.  and L. Hau Tay, eds., 
27th International Cocoa Beach Conference on Advanced Ceramics and Composites, 
Ceramic Science and Engineering Proceedings, Cocoa Beach, Florida, USA, 2003, 
p.535-542.

71.  N. Margadant, S. Siegmann, T. Keller, W. Wagner, P. Scherrer and A. 
Kulkarni, "Insights to Spraying Conditions, Microstructure and Properties and 
Their Statistical Correlations for Different Thermal Spraying Processes Using 
Complementary Characterization Methods", in C. Moreau and B. R. Marple, eds., 
Thermal Spray: Advancing the Science and Applying the Technology (ITSC 2003), 
ASM International, Materials Park, OH, USA, 2003, p1053

72.  A. Kulkarni, S. Sampath, H. Herman and A. Goland, "Porosity -Thermal 
Conductivity Relationships in Plasma Sprayed Zirconia Coatings", in C. C. 
Berndt, ed., Thermal Spray: Surface Engineering via Applied Research (ITSC 
2000), ASM International, Materials Park, OH, USA, Montreal, Quebec, Canada, 
2000, p1061.

RESIDUAL STRESS

JOURNALS

73.  J. Matejicek and S. Sampath, "In situ measurement of residual stresses 
and elastic moduli in thermal sprayed coatings - Part 1: apparatus and 
analysis", Acta Materialia, 51 (2003), pp. 863-872.

74.  J. Matejicek, S. Sampath, D. Gilmore and R. Neiser, "In situ 
measurement of residual stresses and elastic moduli in thermal sprayed 
coatings - Part 2: processing effects on properties of Mo coatings", Acta 
Materialia, 51 (2003), pp. 873-885

75.  J. Matejicek, S. Sampath, T. Gnaupel-Herold and H. J. Prask, "Residual 
stress in sprayed Ni+5%Al coatings determined by neutron diffraction", Applied 
Physics A, 74 (2002), pp. S1692-S1694.

76.  J. Matejicek and S. Sampath, "Intrinsic residual stresses in single 
splats produced by thermal spray processes", Acta Materialia, 49 (2001), pp. 
1993-1999.

PROCEEDINGS

77.  J. Matejicek, S. Sampath, T. Gnaeupol-Herold and H. Prask, "Processing 
effects on residual stresses in Ni-5%Al coatings – Comparison of differenct 
methods", in C. C. Berndt, ed., Thermal Spray: Surface Engineering via Applied 
Research (ITSC 2000), ASM International, Materials Park, OH, USA, Montreal, 
Quebec, Canada, 2000, p351.

MECHANICAL PROPERTIES
JOURNALS

78.  L. Prchlik, "Input error sensitivity of hardness and elastic modulus 
evaluated from indentation load-displacement records by Oliver and Pharr 
method", Journal of Materials Science, 39 (2004), pp. 1185-1193.

79.  Y. Gu, T. Nakamura, L. Prchlik, S. Sampath and J. Wallace, "Micro-
indentation and inverse analysis to characterize elastic-plastic graded 
materials", Materials Science and Engineering A, 345 (2003), pp. 223-233.

80.  L. Prchlik, J. Pisacka and S. Sampath, "Deformation and strain 
distribution in plasma sprayed nickel-aluminum coating loaded by a spherical 
indenter", Materials Science and Engineering A, 360 (2003), pp. 264-274.

81.  Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura and H. Herman, "Effects 
of pores and interfaces on effective properties of plasma sprayed zirconia 
coatings", Acta Materialia, 51 (2003), pp. 5319-5334.

82.  Z. Wang and T. Nakamura, "Simulations of Crack Propagation in Elastic-
Plastic Graded Materials", Mechanics of Materials, 36 (2003), pp. 601-622.

83.  A. H. Dent, S. DePalo and S. Sampath, "Examination of the wear 
properties of HVOF sprayed nanostructured and conventional WC-Co cermets with 
different binder phase contents", Journal of Thermal Spray Technology, 11 
(2002), pp. 551-558

84.  J. Alcala, F. Gaudette, S. Suresh and S. Sampath, "Instrumented 
spherical micro-indentation of plasma-sprayed coatings", Materials Science and 
Engineering A, 316 (2001), pp. 1-10.

85.  M. Dao, N. Chollacoop, K. J. Van Vliet, T. A. Venkatesh and S. Suresh, 
"Computational modeling of the forward and reverse problems in instrumented 
sharp indentation", Acta Materialia, 49 (2001), pp. 3899-3918.

86.  T. Nakamura and Z. Wang, "Computational simulations of crack 
propagation in porous materials", Journal of Applied Mechanics-Transactions of 
the ASME, 68 (2001), pp. 242-251.

87.  L. Prchlik, J. Gutleber and S. Sampath, "Deposition and properties of 
high-velocity-oxygen-fuel and plasma-sprayed Mo-Mo2C composite coatings", 
Journal of Thermal Spray Technology, 10 (2001), pp. 643-655

88.  L. Prchlik, S. Sampath, J. Gutleber, G. Bancke and A. W. Ruff, 
"Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded 
materials", Wear, 249 (2001), pp. 1103-1115.

89.  T. Nakamura, G. Qian and C. C. Berndt, "Effects of pores on mechanical 
properties of plasma-sprayed ceramic coatings", Journal of the American Ceramic 
Society, 83 (2000), pp. 578-584.

90.  T. Nakamura, T. Wang and S. Sampath, "Determination of properties of 
graded materials by inverse analysis and instrumented indentation", Acta 
Materialia, 48 (2000), pp. 4293-4306. 

PROCEEDINGS

91.  L. Li, A. Gouldstone and S. Sampath, "Intrinsic Properties of Thermal 
Sprayed Single Splats Substrates", Thermal Spray Solutions: Advances in 
Technology and application (ITSC 2004), Osaka, Japan, 2004, Electronic 
proceedings.

92.  T. Nakamura and Y. Gu, "Measurements of elastic-plastic anisotropic 
properties of thermally sprayed coatings using nano-indenters and inverse 
analysis technique", Thermal Spray Solutions: Advances in Technology and 
application (ITSC 2004), Osaka, Japan, 2004, Electronic copy

93.  T. Nakamura and S. Sampath, "Thermally Sprayed FGM and Determination of 
its property by Inverse Analysis, FGM 2000", Ceramic Transations, eds. K. 
Ichikawa, Kluwer Academic Publishers, 2001, p.86-91.

94.  L. Prchlik, A. Vaidya, S. Sampath and H. Herman, "Damage Tolerant 
Tribological Coatings Based on Thermal Sprayed FGMs", Ceramic Transations, 
Functionally Graded Materials 2000, American Ceramic Society, Estes Park, 
Colorado, USA, 2001, p.111

INTEGRATED STUDIES

JOURNALS

95.  S. Sampath, X. Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni and A. 
Vaidya, "Role of thermal spray processing method on the microstructure, 
residual stress and properties of coatings: an integrated study for Ni-5 wt.%Al 
bond coats", Materials Science and Engineering A, 364 (2004), pp. 216-231.

96.  A. Kulkarni, A. Vaidya, A. Goland, S. Sampath and H. Herman, 
"Processing effects on porosity-property correlations in plasma sprayed yttria-
stabilized zirconia coatings", Materials Science and Engineering A, 359 (2003), 
pp. 100-111.

97.  S. Sampath, X. Jiang, A. Kulkarni, J. Matejicek, D. L. Gilmore and R. 
A. Neiser, "Development of process maps for plasma spray: case study for 
molybdenum", Materials Science and Engineering A, 348 (2003), pp. 54-66.

PROCEEDINGS

98.  A. Vaidya, T. Streibl, L. Li, S. Sampath, A. Gouldstone, O. Kovarik and 
R. Greenlaw, "Comprehensive Study of the Process-property Correlations: Case 
Study for Molybdenum Coatings", Thermal Spray Solutions: Advances in Technology 
and application (ITSC 2004), Osaka, Japan, 2004, Electronic proceedings

99.  G. Wei and H. Zhang, "An Integrated Thermal Spray Modeling from 
Particle in-flight to Coating Deposition", 6th International Symposium on Heat 
Transfer, Beijing, China, 2004, p.90-95

100.  D. Gilmore, R. Neiser, Y. Wan and S. Sampath, "Process Maps for Plasma 
Spray Part I: Plasma - Particle Interactions", in C. C. Berndt, ed., Thermal 
Spray Surface Engineering via Applied Research (Proceedings of the 1st ITSC, 
May 2000), ASM International, Materials Park, 2000, p149.

101.  X. Jiang, J. Matejicek , A. Kulkarni, H. Herman, S. Sampath, D. Gilmore 
and R. Neiser, "Process Maps for Plasma Spray Part II : Deposition and 
Properties", in C. C. Berndt, ed., Thermal Spray Surface Engineering via 
Applied Research (Proceedings of the 1st ITSC, May 2000), ASM International, 
Materials Park, 2000, p157.

102.  G. Wei, H. B. Xiong, L. L. Zheng and H. Zhang, "Modeling from Particle 
In-flight to Coating Build-up for Thermal Spray Processes", 2004 ASME Heat 
Transfer/Fluids Engineering Summer Conference, HT-FED2004-5636, Charlotte, 
North Carolina, 2004, Electronic proc.

103.  H. Herman and A. Kulkarni, "Thermal Spray Coatings: Materials, 
Processing and Properties", 1st International ICAMP Meeting, New Zealand, 2000, 
p.13.

104.  H. Herman, S. Sampath and R. McCune, "Thermal spray: Current status and 
future trends", MRS Bulletin, 25 (2000), pp. 17-25.

105.  S. Sampath and R. McCune, "Thermal-spray processing of materials", MRS 
Bulletin, 25 (2000), pp. 12-14.

SPRAY SYNTHESIS

JOURNALS

106.  X. Z. Guo, P. S. Devi, B. G. Ravi, J. B. Parise, S. Sampath and J. C. 
Hanson, "Phase evolution of yttrium aluminium garnet (YAG) in a citrate-nitrate 
gel combustion process", Journal of Materials Chemistry, 14 (2004), pp. 1288-
1292.

107.  P. S. Devi, Y. Lee, J. Margolis, J. B. Parise, S. Sampath, H. Herman 
and J. C. Hanson, "Comparison of citrate-nitrate gel combustion and precursor 
plasma spray processes for the synthesis of yttrium aluminum garnet", J. 
Materials Research, 17 (2002), pp. 2846-2851.

108.  P. S. Devi, J. Margolis, J. B. Parise, C. P. Grey, S. Sampath, H. 
Herman and H. D. Gafney, "Single-step deposition of Eu-doped Y2O3 phosphor 
coatings through a precursor plasma spraying technique", J. Materials Research, 
17 (2002), pp. 2771-2774.

109.  R. Goswami, H. Herman, S. Sampath, J. Parise, Y. M. Zhu and D. Welch, 
"Shock-induced transformations in hexagonal boron nitride by high-velocity 
thermal spray", Journal of the American Ceramic Society, 85 (2002), pp. 2437-
2443.

110.  P. S. Devi, J. Margolies, H. Liu, C. P. Grey, S. Sampath, H. Herman and 
J. Parise, "Yttrium Aluminum Garnet (YAG) Films through a precursor plasma 
spraying technique", J. Am. Cer. Soc., 84(8), (2001), pp.1906.

111.  S. D. Parukuttyamma, J. Margolis, H. M. Liu, C. P. Grey, S. Sampath, H. 
Herman and J. B. Parise, "Yttrium aluminum garnet (YAG) films through a 
precursor plasma spraying technique", Journal of the American Ceramic Society, 
84 (2001), pp. 1906-1908.

112.  R. Goswami, H. Herman, S. Sampath and J. B. Parise, "Diamond synthesis 
by high-velocity thermal spray: The laboratory analogue of a meteorite impact", 
Journal of Materials Research, 15 (2000), pp. 25-28.

PROCEEDINGS

113.  P. Sujatha, J. Margolies, H. Liu, J. B. Parise, C. P. Grey, S. Sampath, 
P. Gouma and H. Herman, "Deposition and Characterization of Y3Al5O12(YAG) Films 
and Powders by Plasma Spray Synthesis", Materials Research Society, Symposium 
Proceeding, 2001, Vol. 658, GG6.29.1 (web proceedings).

114.  P. S. Devi, J. Margolis, H. M. Liu, J. Parise, C. P. Grey, S. Sampath, 
P. Gouma and H. Herman, "Deposition and Characterization of YAG Films and 
Powders by Plasma Spray Synthesis", Material Research Society Proceedings, 
Vol.658,  2000, Eds. Geselbracht M.J., Greedan J.E., Johnson D. C.and 
Subramanian M.C

115.  S. Sampath, L. Prchlik and K. Kishi, "Synthesis: Thermo-Mechanical 
Properties and Fictional Responses of NiCrAlY-PSZ Composite and Graded 
Coatings", in C. C. Berndt, ed., Thermal Spray: Surface Engineering via Applied 
Research (ITSC 2000), ASM International, Materials Park, OH, USA, Montreal, 
Quebec, Canada, 2000, p1227

FUNCTIONAL MATERIALS: ELECTRONICS AND SENSORS

JOURNALS

116.  Q. Y. Yan, R. J. Gambino,and S. Sampath, "Magnetostriction and stress 
measurements in plasma sprayed MnZn ferrite films", J. Applied Physics, 97, 1 
(2005).

117.  Q. Chen, J. P. Longtin, S. Tankiewicz, S. Sampath and R. J. Gambino, 
"Ultrafast laser micromachining and patterning of thermal spray multilayers for 
thermopile fabrication", Journal of Micromechanics and Microengineering, 14 
(2004), pp. 506-513.

118.  R. Gambino, M. M. Raja, S. Sampath, and R. Greenlaw, "Plasma sprayed 
thick film anisotropic magneto-resistive (amr) sensors", IEEE Sensors, 4(2004), 
pp.764-768.

119.  J. Longtin, S. Sampath, S. Tankiewicz, R. J. Gambino and R. J. 
Greenlaw, "Sensors for harsh environments by direct-write thermal spray", IEEE 
Sensors Journal, 4 (2004), pp. 118-121.

120.  T. Tong, L. Li, Q. Chen, J. Longtin, S. Tankiewicz and S. Sampath, 
"Ultrafast laser micromachining of thermal sprayed coatings for microheaters: 
design, fabrication and characterization", Sensors and Actuators A, 114 (2004), 
pp. 102-111.

121.  Q. Y. Yan, R. J. Gambino, S. Sampath, L. H. Lewis and E. Baumberger, 
"Exchange Bias in Plasma-sprayed MnZn Ferrites", IEEE Transactions on 
Magnetics, 40 (2004), pp. 2787-2789.

122.  Q. Y. Yan, R. J. Gambino, S. Sampath, L. H. Lewis, L. Li, E. 
Baumberger, A. Vaidya and H. B. Xiong, "Effects of Zinc Loss on the Magnetic 
Properties of Plasma-sprayed MnZn Ferrite", Acta Materialia, 52 (2004), pp. 
3347-3353.

123.  Q. Y. Yan, R. J. Gambino and S. Sampath, "Plasma-sprayed MnZn Ferrites 
with Insulated Fine Grains and Increased Resistivity for High Frequency 
Application", IEEE Transactions on Magnetics, 40 (2004), pp. 3346-3351.

124.  K. Ahn, B. W. Wessels and S. Sampath, "Dielectric properties of plasma-
spray-deposited BaTiO3 and Ba0.68Sr0.32TiO3 thick films", Journal of Materials 
Research, 18 (2003), pp. 1227-1231.

125.  Q. Y. Yan, R. J. Gambino and S. Sampath, "Low-temperature annealing 
effect on plasma sprayed MnZn ferrite for planar transformers of high-frequency 
applications", IEEE Transactions on Magnetics, 39 (2003), pp. 3106-3108.

126.  M. H. Yu, P. S. Devi, L. H. Lewis, S. Sampath, J. B. Parise and R. J. 
Gambino, "Novel synthesis and magnetocaloric assessment of functional oxide 
perovskites", Materials Science and Engineering B, 97 (2003), pp. 245-250.

127.  Y. L. Soo, G. Kioseoglou, S. Kim, Y. H. Kao, P. Sujatha, J. Parise, R. 
J. Gambino and P. Gouma, "Local Enviroment Surrounding Magnetic Impurity Atoms 
in a Structural Phase Transition Co-doped TiO2 Nanocrystal Ferromagnetic 
Semiconductors", Applied Physics Letters, 81 (2002), pp. 655-657.

128.  S. Sampath, R. J. Gambino, J. Longtin, H. Herman, R. Greenlaw and E. 
Tormey, Direct Write Electronics and Sensors by Thermal Spray, Invited Review, 
in D. Chrisey, ed., Direct Write Electronics, 2001, pp. 261.

PROCEEDINGS

129.  R. Gambino, M. Manivel Raja, S. Sampath, and R. Greenlaw, "Plasma 
sprayed thick film anisotropic magnetoresistive (AMR) sensors", Proceedings of 
IEEE symposium on sensors, Orlando, Florida, 2002, pp. 656 – 659

130.  J. Longtin, S. Sampath, R. Gambino, S. Tankiewicz and R.Greenlaw, 
"Sensors for harsh environment by direct write thermal spray", Proceedings of 
IEEE symposium on sensors, Orlando, Florida, 2002, pp. 598 – 601.

131.  E. Rajamaki, T. Varis, A. Vaidya, A. Kulkarni, M. Karadge, J. Gutleber, 
S. Sampath and H. Herman, "Parameter optimization of HVOF sprayed alumina and 
effect of the spray parameters on the electrical properties of the coatings", 
in E. Lugscheider, ed., Int. Thermal Spray Conf. (ITSC 2002), ASM 
International, Essen, Germany, 2002, p622

132.  K. Ahn, B. W. Wessels, R. Greenlaw and S. Sampath, "Dielectric 
properties of spray deposited BaTiO3 and Ba0.68Sr0.32TiO3, Materials Research 
Society Proceedings: Electroactive Polymers and Rapid Prototyping", Eds. 
Chrisey D. B., Danforth S. C., Direct Write Electronics, 2001.

133.  J. Sun, C. H. Fan and J. P. Longtin, "Laser Processing of Thermal Spray 
Patterns using Femtosecond Pulses", 35th National Heat Transfer Conference, 
NHTC01-1823, Anaheim, California, 2001, Electronic copy

134.  A. H. Dent, A. S. Patel, J. Gutleber, S. Sampath, H. Herman and E. 
Tormey, "Structure-Dielectric Behavior Relationships in HVOF Sprayed BaTiO3", 
in C. C. Berndt, ed., Thermal Spray: Surface Engineering via Applied Research 
(ITSC 2000), ASM International, Materials Park, OH, USA, Montreal, Quebec, 
Canada, 2000, p495.

135.  S. Y. Tan, R. J. Gambino, R. Goswami, S. Sampath and H. Herman, 
"Electrical Characteristics of Thermal Sprayed Silicon Coatings", Materials for 
Direct Write Electronics, Materials Research Society, 2000, p189

136.  S. Sampath, A. Patel, A. H. Dent, R. Gambino, H. Herman, R. Greenlaw, 
and E. Tormey, "Thermal Spray Techniques for Fabrication of Meso-Electronics 
and Sensors", Materials for Direct Write Electronics, Materials Research 
Society, 2000, p181

back to the Nuggets page
back to the Center for Thermal Spray Research

11/07/2005 EZ and JQ